Brand: Hisense
Fits 9000 & 12000 BTU AC outdoor units
Heavy-duty galvanized steel build
Anti-rust powder-coated white finish
Reinforced L-shaped wall mount frame
Includes vibration pads & anchor bolts
SKU: MF-2443-TXVKD
Categories: AC Mount Brackets
Hisense DL-301L Aircon Outdoor Mount for 9000 & 12000 BTU is a heavy-duty, purpose-engineered wall mounting bracket designed specifically to support 1.0 HP (9000 BTU) and 1.5 HP (12000 BTU) split air conditioner outdoor units. Built to match the footprint, weight distribution, and mounting bolt geometry of standard Hisense and compatible split-system condensers, the DL-301L provides a rock-solid architectural foundation that elevates and protects your cooling investment.
Keeping an outdoor air conditioning condenser elevated above ground level delivers immediate mechanical and operational advantages in both residential and commercial environments. Ground-mounted units are routinely exposed to stagnant rainwater, mud splashes, dust accumulation, garden debris, crawling pests, and accidental physical impacts. By anchoring the outdoor unit securely to an exterior concrete, brick, or masonry wall using the Hisense DL-301L mounting bracket, you safeguard the delicate aluminum condenser fins, copper tubing, fan motor, and electronic control boards from ground-level moisture and debris buildup. Elevated wall mounting also promotes unrestricted 360-degree airflow around the heat exchanger coils, enabling rapid thermal dissipation, preventing hot air recirculation, reducing compressor workload, and preserving peak energy efficiency throughout years of continuous operation.
Constructed from high-tensile galvanized cold-rolled steel, the Hisense DL-301L is engineered to handle both the static dead weight of 9000 BTU and 12000 BTU condensers—typically ranging between 18.5 kg and 28.5 kg—and the continuous dynamic torque generated when the rotary or DC inverter compressor and axial condenser fan start, cycle, and run at full load. Its rigid L-shaped cantilevered profile features precision-stamped structural ribs and reinforced corner gussets that distribute downward and outward mechanical forces evenly across the vertical wall plates and expansion anchors. This structural rigidity prevents sagging, metal fatigue, or forward tilt over long service intervals.
Outdoor HVAC hardware must withstand relentless exposure to intense tropical sunlight, driving rain, high ambient humidity, and fluctuating temperatures without corroding or staining exterior walls. To ensure long-term weather resilience, the Hisense DL-301L undergoes a multi-stage surface treatment that pairs hot-dip or electro-galvanized steel protection with a baked electrostatic powder-coated finish. This dual-barrier defense seals the underlying steel against oxidation and moisture ingress, eliminates unsightly rust streaks down painted exterior facades, and maintains a clean, professional off-white appearance that blends seamlessly with Hisense outdoor condenser housings.
Acoustic comfort is a major priority when mounting an outdoor unit onto an exterior wall shared with a bedroom, living room, study, or office space. Without proper mechanical isolation, low-frequency vibrations produced by the compressor can travel directly through rigid steel brackets into masonry walls, creating an audible indoor hum. The Hisense DL-301L addresses this issue by incorporating dense elastomeric anti-vibration rubber isolation pads positioned between the condenser mounting feet and the horizontal support arms. These shock-absorbing isolators dampen harmonic resonance, noticeably reduce operational noise transmission into the building structure, and help prevent mounting nuts and bolts from loosening over time.
Designed for straightforward, accurate installation by HVAC technicians and contractors, the Hisense DL-301L features elongated, precision-slotted horizontal support channels that accommodate slight variations in condenser foot spacing across different 9000 BTU and 12000 BTU models. Pre-punched vertical mounting slots allow installers to align both L-brackets cleanly with a spirit level and secure them firmly into solid concrete or reinforced block walls using the included heavy-duty expansion anchor bolts. In urban apartments, retail storefronts, balconies, and narrow side passages where ground space is scarce, wall-mounting with the DL-301L frees up valuable floor area below, keeps the condenser safely out of reach of tampering or flooding, and positions the unit at an accessible height for routine coil cleaning and refrigerant servicing.
Whether you are completing a brand-new Hisense split air conditioner installation or replacing a corroded legacy bracket, the Hisense DL-301L Aircon Outdoor Mount for 9000 & 12000 BTU delivers the structural load capacity, corrosion resistance, vibration damping, and precision fit required for a safe, quiet, and durable outdoor HVAC setup.
Brand: Hisense
Model Number: DL-301L
Product Type: Outdoor Air Conditioner Wall Mounting Bracket
Compatible AC Capacities: 9000 BTU (1.0 HP) and 12000 BTU (1.5 HP) Split Air Conditioners
Compatible Outdoor Unit Footprint: Fits standard 660 × 482 × 240 mm and similar compact condenser chassis
Structural Design: Heavy-Duty L-Shaped Cantilevered Wall Mount with Reinforced Support Gussets
Primary Material: High-Tensile Galvanized Cold-Rolled Steel
Surface Coating: Weather-Resistant Electrostatic Powder-Coated Finish
Color: Off-White / Creamy White
Mounting Arm Configuration: Universal Precision-Slotted Horizontal Support Channels
Vibration Damping: High-Density Rubber Anti-Vibration Isolation Pads Included
Installation Hardware: Heavy-Duty Wall Expansion Anchor Bolts, Condenser Bolts, Nuts, and Washers Included
Recommended Wall Substrates: Solid Poured Concrete, Reinforced Brick, and Structural Masonry Walls
Application Environment: Outdoor Residential, Apartment, Retail, and Office HVAC Installations
Box Contents: 2x L-Shaped Mounting Brackets, 4x Anti-Vibration Rubber Pads, Complete Fastener & Anchor Kit
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
USh110,000 USh120,000