0 0
0
No products in the cart.

Hisense DL-302L Aircon Outdoor Wall Mount Bracket 18000–24000 BTU Heavy-Duty Galvanized Steel

Brand: Hisense

USh110,000  USh120,000

  • Fits 18000 & 24000 BTU AC outdoor units

  • Extra-heavy-duty galvanized steel build

  • Anti-corrosion powder-coated white finish

  • Reinforced L-shaped wall mount frame

  • Includes rubber pads & expansion bolts

(Available)
Quantity

SKU: MF-2443-DVCKQ

Categories: AC Mount Brackets

Hisense DL-302L Aircon Outdoor Mount for 18000 & 24000 BTU is a reinforced, purpose-built wall mounting bracket designed to anchor, elevate, and stabilize 2.0 HP (18000 BTU) and 2.5 HP / 3.0 HP (24000 BTU) split air conditioner outdoor units across solid exterior walls.

Elevating a large 18000 BTU or 24000 BTU outdoor condenser well above ground level delivers critical protection and performance benefits. Ground-placed units are constantly exposed to pooling rainwater, mud splashes, dust buildup, fallen leaves, landscaping debris, pests, and accidental physical impact. By securely fastening the condenser to a reinforced concrete, brick, or masonry wall with the Hisense DL-302L mounting bracket, you protect the high-output compressor, aluminum heat-exchanger fins, copper refrigerant lines, and outdoor PCB control modules from ground moisture and debris accumulation. Elevated wall mounting also guarantees unrestricted 360-degree airflow around the condenser coils, enabling rapid heat rejection, preventing hot exhaust air recirculation, lowering compressor head pressure, and preserving peak cooling efficiency under heavy daily workloads.

Because 18000 BTU and 24000 BTU outdoor units typically weigh between 34 kg and 61 kg—and generate substantial rotational torque when their larger compressors and high-volume condenser fans start and run at full speed—standard light-duty brackets are inadequate. The Hisense DL-302L is fabricated from thick-gauge, high-tensile galvanized cold-rolled steel with extended horizontal support arms and deep vertical wall plates to match larger condenser footprints (such as 810 × 585 × 280 mm and 860 × 650 × 310 mm chassis). Precision-stamped structural ribs and reinforced corner gussets distribute both static dead weight and dynamic operational loads evenly across the wall anchor points, preventing downward sagging, arm flexing, or forward tilt over years of service.

Outdoor HVAC hardware must endure constant exposure to harsh ultraviolet radiation, torrential tropical rainstorms, high ambient humidity, and wide thermal cycles without rusting or weakening. To ensure long-term structural integrity in demanding outdoor climates, the Hisense DL-302L combines galvanized steel corrosion protection with a durable, baked electrostatic powder-coated finish. This dual-layer weather shield seals the steel frame against oxidation and moisture ingress, prevents unsightly rust streaks from staining exterior building walls, and maintains a clean off-white finish that matches Hisense outdoor condenser units.

Controlling vibration and structure-borne noise is especially important with larger 18000 BTU and 24000 BTU compressors. When mounted onto an exterior wall adjacent to bedrooms, offices, or customer-facing spaces, mechanical vibrations can easily transfer through rigid steel into masonry walls as a low-frequency hum. The Hisense DL-302L incorporates heavy-duty elastomeric anti-vibration rubber isolation pads positioned between the condenser mounting feet and the horizontal support arms. These dense shock absorbers decouple the vibrating unit from the bracket frame, significantly reducing operational noise transmission into the building while preventing mounting nuts and bolts from loosening over time.

Engineered for straightforward, accurate installation by HVAC technicians and contractors, the Hisense DL-302L features elongated, precision-slotted horizontal mounting channels that accommodate varying bolt-hole spacings across Hisense and compatible 18000 BTU and 24000 BTU split-system models. Pre-punched vertical wall slots enable installers to align both L-brackets accurately with a spirit level and secure them firmly into solid concrete or structural masonry using the included heavy-duty expansion anchor bolts. In commercial buildings, apartments, balconies, and tight side corridors where floor space is limited, wall-mounting with the DL-302L frees up valuable ground area below, keeps the condenser safely away from flooding or tampering, and positions the unit at an ergonomic height for routine coil washing and refrigerant servicing.

Whether you are installing a new high-capacity Hisense split air conditioner or upgrading an aging outdoor support frame, the Hisense DL-302L Aircon Outdoor Mount for 18000 & 24000 BTU provides the extra load-bearing strength, weatherproof durability, vibration isolation, and precision fit needed for a safe, quiet, and long-lasting commercial or residential HVAC installation.

Technical Specifications

  • Brand: Hisense

  • Model Number: DL-302L

  • Product Type: Heavy-Duty Outdoor Air Conditioner Wall Mounting Bracket

  • Compatible AC Capacities: 18000 BTU (2.0 HP) and 24000 BTU (2.5 HP / 3.0 HP) Split Air Conditioners

  • Compatible Outdoor Unit Chassis: Fits large condenser footprints including 810 × 585 × 280 mm, 860 × 650 × 310 mm, and 885 × 795 × 366 mm

  • Structural Design: Extra-Heavy-Duty L-Shaped Cantilevered Wall Mount with Reinforced Support Gussets

  • Primary Construction Material: Thick-Gauge High-Tensile Galvanized Cold-Rolled Steel

  • Surface Finish: Weather-Resistant Electrostatic Powder-Coated Anti-Corrosion Finish

  • Color: Off-White / Creamy White

  • Mounting Arm Configuration: Extended Precision-Slotted Horizontal Support Channels for Wide Foot Spacing

  • Vibration Isolation: Heavy-Duty High-Density Rubber Anti-Vibration Isolation Pads Included

  • Fastener & Anchor Kit: Heavy-Duty Wall Expansion Anchor Bolts, Condenser Mounting Bolts, Nuts, and Washers Included

  • Recommended Mounting Substrates: Solid Poured Concrete, Reinforced Brick, and Structural Masonry Walls

  • Application Environment: Outdoor Commercial, Office, Retail, and Large Residential HVAC Installations

  • Box Contents: 2x Heavy-Duty L-Shaped Wall Brackets, 4x Anti-Vibration Rubber Pads, Complete Mounting & Anchor Bolt Kit


Add your review

Your email address will not be published. Required fields are marked *

Please login to write review!

Upload photos

Looks like there are no reviews yet.