Brand: Hisense
Capacity: 36,000 BTU / 10,000W (3.0 Ton)
Power & Compressor: 3-Phase, Heavy-Duty Fixed Speed
Climate Mode: Dual Cooling and Heating
Airflow & Gas: 1,600 m³/h Airflow, R410A Gas
Included Items: FA Panel, Drain Pump & Remote
SKU: MF-2443-ZF2KX
Categories: Air Conditioner / AC, Hisense air conditioner / AC
Hisense AUC-36HR4SDKA 36,000 BTU (3.0 Ton) Ceiling Cassette Air Conditioner recesses seamlessly inside suspended or gypsum false ceilings, leaving only its sleek, low-profile FA decorative panel exposed. Delivering a rated capacity of 10,000W (36,000 BTU/h) with full reversible Cooling and Heating functionality, this heavy-duty 3-Ton cassette system combines architectural subtlety with industrial-grade HVAC endurance.
Unlike bulky wall-mounted split units that blow conditioned air from a single corner and leave distant zones warm, the Hisense AUC-36HR4SDKA mounts centrally overhead to circulate conditioned air uniformly across rooms measuring up to 100–120 square meters. Its commercial-standard indoor chassis measures 840 × 272 × 840 mm and pairs with the 950 × 50 × 950 mm FA decorative fascia, sitting flush against the ceiling plane. Driven by a high-efficiency backward centrifugal fan pushing up to 1,600 m³/h (941 CFM) of airflow across four wide-angle outlets and corner vents, the cassette eliminates stagnant hot spots and thermal stratification so every desk, dining table, or lounge seat enjoys balanced thermal comfort.
Designed specifically for commercial electrical infrastructures, the Hisense AUC-36HR4SDKA operates on a 3-Phase (380–415V~, 50Hz) outdoor power supply paired with a 220–240V~ single-phase indoor supply. Three-phase power distribution balances electrical load evenly across all three phases, minimizing start-up current spikes, reducing strain on building switchgear and backup generators, and ensuring long-term reliability for its commercial Fixed Speed rotary compressor. Without complex variable-frequency inverter boards, this fixed-speed architecture delivers immediate 100% thermal recovery when exterior doors open frequently and simplifies routine field servicing.
Indoor comfort requirements shift throughout the year between hot, humid afternoons and cool rainy-season mornings or chilly evenings. Equipped with a reversible heat pump system, the Hisense AUC-36HR4SDKA provides both rapid Cooling and responsive Heating in a single concealed overhead unit. In cooling mode, it quickly strips away heat and excess ambient humidity; when indoor temperatures drop, switching to heating mode circulates gentle, uniform warmth downward without the dry air, floor clutter, or fire hazards of portable electric heaters.
Reliable condensate drainage is essential for any ceiling-recessed air conditioner. The Hisense AUC-36HR4SDKA comes factory-equipped with a built-in high-lift condensate water pump capable of lifting drain water up to 1.2 meters vertically through its ODΦ32 mm drainage port. This integrated pump gives HVAC installers broad flexibility when routing drain lines across overhead ceiling voids to exterior downpipes—overcoming gravity-drain slope constraints and protecting false ceilings against moisture or water leaks. Charged with zero-ozone-depletion R410A refrigerant (2.15 kg factory charge), the system supports extended refrigerant piping runs up to 40 meters in length and 20 meters in vertical elevation difference.
This unit ships ready for ceiling integration with its crisp white FA decorative panel, an integrated washable high-density dust filter to capture airborne dust particles, and an ergonomic wireless infrared remote control supporting a 24-hour programmable timer, Sleep mode, and Auto-Restart memory following power outages. Please note: To accommodate custom site-specific routing between the ceiling void and exterior condenser placement, copper refrigerant pipes and interconnecting cables are not included in the box and should be sized to your exact installation distance.
Brand: Hisense
System Model Number: AUC-36HR4SDKA
Indoor Unit Model: AUC-36HR4SKA
Air Conditioner Type: 4-Way Ceiling Cassette Split System
Nominal Capacity: 36,000 BTU/h / 10,000 W (3.0 Ton)
Compressor Technology: Fixed Speed (Non-Inverter) Heavy-Duty Compressor
Climate Functionality: Cooling and Heating (Reversible Heat Pump)
Power Supply: Outdoor: 380–415V~, 3-Phase, 50Hz | Indoor: 220–240V~, 1-Phase, 50Hz
Indoor Airflow Volume (Hi / Med / Lo): 1,600 / 1,400 / 1,100 m³/h (941 / 823 / 647 CFM)
Indoor Sound Pressure Level (Hi / Med / Lo): 50 / 48 / 45 dB(A)
Outdoor Sound Pressure Level: 62 dB(A)
Refrigerant Type & Factory Charge: R410A (2.15 kg)
Design Pressure (High / Low): 4.4 / 1.6 MPa
Refrigerant Pipe Connections: Liquid Side: Φ9.52 mm (3/8") | Gas Side: Φ19.05 mm (3/4")
Max Pipe Length / Max Elevation Difference: 40 m / 20 m
Drainage System: Built-in Condensate Water Pump (1.2 m Max Lift Height, ODΦ32 mm Drain Port)
Indoor Chassis / Panel Dimensions (W × H × D): Chassis: 840 × 272 × 840 mm (28.0 kg Net / 34.5 kg Gross) | FA Panel: 950 × 50 × 950 mm
Outdoor Unit Dimensions (W × H × D): 885 × 795 × 366 mm (65 kg Net / 69 kg Gross)
Included Accessories: FA Decorative Ceiling Panel, Washable Dust Filter, Wireless Remote Control (Copper Pipe & Power Cable Not Included)
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.