Brand: Hisense
Capacity: 48,000 BTU / 14,500W (4.0 Ton)
Power & Compressor: 3-Phase, Heavy-Duty Fixed Speed
Climate Mode: Dual Cooling and Heating
Airflow & Gas: 1,800–2,000 m³/h Airflow, R410A
Included Items: FA Panel, Drain Pump & Remote
SKU: MF-2443-S7FRI
Categories: Air Conditioner / AC, Hisense air conditioner / AC
Hisense AUC-48HR6SEKA 48,000 BTU (4.0 Ton) Ceiling Cassette Air Conditioner recesses seamlessly inside suspended or gypsum false ceilings, leaving only its sleek, low-profile FA decorative panel exposed. Delivering a nominal capacity of 48,000 BTU/h (14,500W cooling / 15,000W heating) with full reversible Cooling and Heating functionality, this heavy-duty 4.0-Ton cassette system blends architectural discretion with industrial-grade HVAC endurance.
Unlike bulky wall-mounted split units or floor-standing cabinets that occupy floor area and blow conditioned air from a single perimeter point, the Hisense AUC-48HR6SEKA mounts centrally overhead to circulate conditioned air uniformly across rooms measuring up to 130–160 square meters. Its commercial-standard indoor chassis measures 840 × 272 × 840 mm and pairs with the 950 × 50 × 950 mm FA decorative fascia, sitting flush against the ceiling plane. Driven by a high-efficiency backward centrifugal fan pushing up to 1,800–2,000 m³/h of airflow across four wide-angle outlets and corner vents, the cassette eliminates stagnant hot spots and thermal stratification so every desk, dining table, or lounge seat enjoys balanced thermal comfort.
Designed specifically for commercial electrical infrastructures, the Hisense AUC-48HR6SEKA operates on a 3-Phase (380–415V~, 50Hz) outdoor power supply paired with a 220–240V~ single-phase indoor supply. Three-phase power distribution balances electrical load evenly across all three phases, minimizing start-up current spikes, reducing strain on building switchgear and backup generators, and ensuring long-term reliability for its commercial Fixed Speed compressor. Without complex variable-frequency inverter boards, this fixed-speed architecture delivers immediate 100% thermal recovery when exterior doors open frequently and simplifies routine field servicing.
Indoor comfort requirements shift throughout the year between hot, humid afternoons and cool rainy-season mornings or chilly evenings. Equipped with a reversible heat pump system, the Hisense AUC-48HR6SEKA provides both Turbo Quick Cooling and high-output Heating in a single concealed overhead unit. In cooling mode, it rapidly strips away heat and excess ambient humidity across a 16°C to 30°C set temperature range; when indoor temperatures drop, switching to heating mode circulates gentle, uniform warmth downward without the dry air, floor clutter, or safety hazards of portable electric heaters.
Reliable condensate management is vital for any ceiling-recessed air conditioner. The Hisense AUC-48HR6SEKA comes factory-equipped with a built-in high-lift condensate water pump capable of lifting drain water up to 1.2 meters vertically through its ODΦ32 mm drainage port. This integrated pump gives HVAC installers broad flexibility when routing drain lines across overhead ceiling voids to exterior downpipes—overcoming gravity-drain slope constraints and protecting false ceilings against moisture or water leaks. Charged with zero-ozone-depletion R410A refrigerant (2.40 kg factory charge), the system supports extended refrigerant piping runs up to 40–50 meters in length and 20–25 meters in vertical elevation difference.
This unit ships ready for ceiling integration with its crisp white FA decorative panel, an integrated washable anti-dust filter to capture airborne particles, and an ergonomic wireless infrared remote control supporting a 24-hour programmable timer, Sleep mode, Display On/Off, and Auto-Restart memory following power outages. Please note: To accommodate custom site-specific routing between the ceiling void and exterior condenser placement, copper refrigerant pipes are not included in the box and should be sized to your exact installation distance.
Brand: Hisense
System Model Number: AUC-48HR6SEKA
Air Conditioner Type: 4-Way Ceiling Cassette Split System
Nominal Capacity: 48,000 BTU/h / 4.0 Ton (approx. 14,500 W Cooling / 15,000 W Heating)
Compressor Technology: Fixed Speed (Non-Inverter) Commercial Compressor
Climate Functionality: Cooling and Heating (Reversible Heat Pump)
Power Supply: Outdoor: 380–415V~, 3-Phase, 50Hz | Indoor: 220–240V~, 1-Phase, 50Hz
Temperature Control Range: 16°C – 30°C
Indoor Airflow Volume: 1,800 – 2,000 m³/h
Indoor Sound Pressure Level: 49 – 53 dB(A)
Refrigerant Type & Factory Charge: R410A (2.40 kg)
Design Pressure (High / Low): 4.15 / 1.5 MPa
Refrigerant Pipe Connections: Liquid Side: Φ9.52 mm (3/8") | Gas Side: Φ19.05 mm (3/4")
Drainage System: Built-in Condensate Water Pump (1.2 m Max Lift Height, ODΦ32 mm Drain Port)
Indoor Chassis / Panel Dimensions (W × H × D): Chassis: 840 × 272 × 840 mm (28.0 kg Net / 34.5 kg Gross) | FA Panel: 950 × 50 × 950 mm
Outdoor Unit Dimensions (W × H × D): 950 × 1,050 × 340 mm (96 kg Net / 103 kg Gross)
Convenience & Control Features: Turbo Rapid Cooling, Independent Dehumidification, 24-Hour Timer, Sleep Mode, Display On/Off, Auto-Restart Memory, Washable Anti-Dust Filter
Included Accessories: FA Decorative White Ceiling Panel, Built-in Drain Pump, Washable Filter, Wireless Remote Control (Copper Pipe Not Included)
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.