Brand: Hisense
Capacity: 48,000 BTU / 14,000W (4.0 Ton)
Power & Compressor: 3-Phase, Heavy-Duty Fixed Speed
Climate Mode: Dual Cooling and Heating
Airflow & ESP: 2,000 m³/h, 80–120 Pa Static
Refrigerant & Control: R410A Gas, Wired Controller
SKU: MF-2443-OEX8Y
Categories: Air Conditioner / AC, Hisense air conditioner / AC
Hisense AUD-48HX4SHH / AUW-48H6SP 48,000 BTU (4.0 Ton) Concealed Ducted Split Air Conditioner (Heavy Classic Series) installs completely out of sight inside false ceilings, soffits, or mechanical bulkheads. Distributing conditioned air smoothly through sleek linear slot diffusers or architectural ceiling grilles, this 4.0-Ton system effectively regulates spaces measuring up to 140–160 square meters while keeping your interior ceiling plane clean and uncluttered.
Engineered specifically for commercial electrical infrastructures, the system pairs the AUD-48HX4SHH indoor fan-coil unit (220–240V~, 1-Phase, 50Hz) with the heavy-duty AUW-48H6SP outdoor condensing unit operating on a 3-Phase (380–415V~, 3-Phase, 50Hz) electrical supply. Three-phase power distribution balances electrical load evenly across all three phases, drawing a low rated running current of 8.80A in cooling and 8.60A in heating while minimizing start-up strain on building switchgear and backup generators. Powered by a commercial Fixed Speed rotary compressor (EER 3.00 / COP 3.31), this non-inverter architecture delivers immediate 100% thermal recovery when exterior doors open frequently and simplifies routine field maintenance.
Designed to push conditioned air across extended, multi-branch commercial ductwork runs, the AUD-48HX4SHH indoor chassis measures 1,386 × 350 × 800 mm and houses a high-efficiency centrifugal blower generating 2,000 / 1,800 / 1,600 m³/h of airflow. With a rated External Static Pressure (ESP) of 80 Pa (selectable up to 120–140 Pa), HVAC engineers can easily balance air delivery across long insulated ducts, dampers, and multiple room diffusers without losing throw velocity at distant vents.
To adapt seamlessly to varied ceiling plenum layouts, the Hisense AUD-48HX4SHH supports configurable rear or bottom air return intake, simplifying ductwork transitions during installation. Inside, a corrosion-proof molded polystyrene condensate drain pan with a built-in water-level sensor safeguards false ceilings against overflow. Additionally, a dedicated fresh-air intake knockout enables installers to introduce filtered outdoor air into the return plenum, replenishing indoor oxygen levels and enhancing indoor air quality in high-occupancy commercial venues.
Built for dependable performance across changing seasonal weather, this ducted system combines powerful air conditioning with a reversible heat pump for dual Cooling (14.0 kW / 48,000 BTU) and Heating (15.0 kW / 51,000 BTU) operation. In cooling mode, it rapidly extracts heat and excess ambient humidity; during chilly rainy-season mornings, cool evenings, or high-altitude climates, switching to heating mode circulates gentle, uniform warmth through your ceiling vents without the dry air, floor clutter, or fire hazards of portable electric heaters.
Because the indoor blower operates behind insulated ceiling boards at controlled acoustic levels of 42 / 44 / 46 dB(A) (Lo/Med/Hi), conditioned air enters rooms quietly—ideal for boardrooms, hotels, and clinics. Charged with zero-ozone-depletion R410A refrigerant (2.40 kg factory charge), the system supports extended refrigerant piping runs up to 50–60 meters in length and 15–30 meters in vertical elevation difference. Tailored for hospitality and commercial facility management, it also includes built-in hotel key-card access interlock terminals and fire alarm / smoke detector interlock ports for automated safety and energy control. Daily operation is managed via the included wired wall controller featuring a programmable On/Off timer, Smart Defrost protection, self-diagnostic fault monitoring, and Auto-Restart memory following power outages.
Brand: Hisense
System Model Number: AUD-48HX4SHH / AUW-48H6SP (Heavy Classic Series)
Indoor / Outdoor Unit Models: AUD-48HX4SHH (Indoor) / AUW-48H6SP (Outdoor)
Air Conditioner Type: Concealed Ceiling Ducted Split System (Medium/High Static Pressure)
Nominal Capacity: 48,000 BTU/h / 4.0 Ton (Cooling: 14,000 W / Heating: 15,000 W)
Compressor Technology: Fixed Speed (Non-Inverter) Rotary Compressor
Climate Functionality: Cooling and Heating (Reversible Heat Pump)
Power Supply: Outdoor: 380–415V~, 3-Phase, 50Hz | Indoor: 220–240V~, 1-Phase, 50Hz
Rated Power Input (Cooling / Heating): 4,651 W / 4,532 W
Rated Running Current (Cooling / Heating): 8.80 A / 8.60 A (Max Current: 12.1 A)
Energy Efficiency (EER / COP): 3.00 / 3.31
Indoor Airflow Rate (Hi / Med / Lo): 2,000 / 1,800 / 1,600 m³/h
External Static Pressure (ESP): 80 Pa Rated (Selectable 120 – 140 Pa)
Indoor Sound Pressure Level (Lo / Med / Hi): 42 / 44 / 46 dB(A)
Outdoor Sound Pressure Level: 55 dB(A)
Refrigerant Type & Factory Charge: R410A (2.40 kg)
Refrigerant Pipe Connections: Liquid Side: 9.52 mm (3/8") | Gas Side: Φ19.05 mm (3/4")
Drain Pipe / Max Pipe Length / Max Elevation: 32 mm Drain Port | Up to 60 m Max Pipe Length | Up to 30 m Max Level Difference
Indoor Unit Dimensions (W × H × D): 1,386 × 350 × 800 mm (Net / Gross Weight: 54.0 / 62.0 kg)
Outdoor Unit Dimensions (W × H × D): 950 × 1,050 × 340 mm (Net / Gross Weight: 96.0 / 103.0 kg)
Commercial & Control Features: Wired Wall Controller Included, Rear/Bottom Air Return Option, Fresh Air Intake Port, Hotel Key-Card Interlock, Fire Alarm Interlock, Molded Polystyrene Drain Pan with Level Sensor, Smart Defrost, Auto-Restart
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.