Brand: Hisense
Capacity: 36,000 BTU / 10,550W (3.0 Ton)
Power & Compressor: 3-Phase, Heavy-Duty Fixed Speed
Climate Mode: Dual Cooling and Heating
Airflow & ESP: 1,800 m³/h, 50/80 Pa Static
Refrigerant & Control: R410A Gas, Wired Controller
SKU: MF-2443-23WMJ
Categories: Air Conditioner / AC, Hisense air conditioner / AC
Hisense AUD-36HX4SHH1 / AUW-36H6SD 36,000 BTU (3.0 Ton) Concealed Ducted Split Air Conditioner (Heavy Classic Series) installs completely out of sight inside suspended ceilings, soffits, or utility bulkheads. Distributing conditioned air smoothly through sleek linear slot diffusers or architectural grilles, this 3.0-Ton system effectively covers spaces up to 100–120 square meters while keeping your interior ceiling plane clean and uninterrupted.
Engineered specifically for commercial electrical infrastructures, the system pairs the AUD-36HX4SHH1 indoor fan-coil unit (220–240V~, 1-Phase, 50Hz) with the heavy-duty AUW-36H6SD outdoor condensing unit operating on a 3-Phase (380–415V~, 3-Phase, 50Hz) electrical supply. Three-phase power distribution balances electrical load evenly across all three phases, minimizing start-up current spikes, reducing strain on building switchgear and backup generators, and ensuring long-term durability for its commercial Fixed Speed rotary compressor. Without complex variable-frequency inverter boards, this fixed-speed architecture delivers immediate 100% thermal recovery when exterior doors open frequently and simplifies routine field servicing.
Designed to push conditioned air across multi-outlet commercial ductwork runs, the AUD-36HX4SHH1 indoor chassis measures 1,300 × 350 × 800 mm and houses a high-efficiency centrifugal blower generating 1,800 / 1,650 / 1,500 m³/h (1,059 / 971 / 882 CFM) of airflow. With a rated External Static Pressure (ESP) of 50 Pa (adjustable up to 80 Pa), installers can easily balance airflow across branched ducts, flexible collars, and multiple room diffusers without losing air throw at distant vents.
To adapt effortlessly to varied ceiling plenum layouts, the Hisense AUD-36HX4SHH1 supports configurable rear or bottom air return intake, simplifying ductwork transitions during installation. Inside, a corrosion-proof built-in condensate drain pan with a water-level protection switch safeguards false ceilings against overflow. Additionally, a dedicated fresh-air intake knockout allows installers to introduce filtered outdoor air into the return plenum, replenishing indoor oxygen levels and improving air quality in high-occupancy commercial venues.
Built for dependable performance across changing seasonal conditions, this ducted system combines powerful air conditioning with a reversible heat pump for dual Cooling and Heating operation. In cooling mode, it rapidly strips away heat and excess indoor humidity; during chilly rainy-season mornings, cool evenings, or high-altitude climates, switching to heating mode circulates gentle, uniform warmth through your ceiling vents without the dry air, floor clutter, or fire hazards of portable electric heaters.
Because the indoor blower operates behind insulated ceiling boards at quiet acoustic levels of 40 / 38 / 37 dB(A) (Hi/Med/Lo), conditioned air enters rooms with minimal audible disruption—ideal for boardrooms, hotels, and clinics. Charged with zero-ozone-depletion R410A refrigerant (2.60 kg factory charge), the system supports refrigerant piping runs up to 30 meters in length. Tailored for hospitality and commercial facility management, it also includes built-in hotel key-card access interlock terminals and fire alarm / smoke detector interlock ports for automated safety and energy control. Daily operation is managed via the included wired wall controller featuring a programmable On/Off timer, filter-clean reminder, Smart Defrost protection, and Auto-Restart memory following power outages.
Brand: Hisense
System Model Number: AUD-36HX4SHH1 / AUW-36H6SD (Heavy Classic Series; referenced as AUD-36HX4HH1)
Indoor / Outdoor Unit Models: AUD-36HX4SHH1 (Indoor) / AUW-36H6SD (Outdoor)
Air Conditioner Type: Concealed Ceiling Ducted Split System (Medium Static Pressure)
Nominal Capacity: 36,000 BTU/h / 10,550 W (3.0 Ton)
Compressor Technology: Fixed Speed (Non-Inverter) Commercial Compressor
Climate Functionality: Cooling and Heating (Reversible Heat Pump)
Power Supply: Outdoor: 380–415V~, 3-Phase, 50Hz | Indoor: 220–240V~, 1-Phase, 50Hz
Indoor Airflow Rate (Hi / Med / Lo): 1,800 / 1,650 / 1,500 m³/h (1,059 / 971 / 882 CFM)
External Static Pressure (ESP): 50 Pa Rated (Adjustable 50 / 80 Pa)
Indoor Sound Pressure Level (Hi / Med / Lo): 40 / 38 / 37 dB(A)
Outdoor Sound Pressure Level: 62 dB(A)
Refrigerant Type & Factory Charge: R410A (2.60 kg)
Design Pressure (High / Low): 4.8 / 1.6 MPa
Refrigerant Pipe Connections: Liquid Side: Φ9.52 mm (3/8") | Gas Side: Φ19.05 mm (3/4")
Max Pipe Length / Drain Connection: 30 m Max Pipe Length | Φ32 mm Built-in Drain Pan Connection
Indoor Unit Dimensions (W × H × D): 1,300 × 350 × 800 mm (Net / Gross Weight: 54 / 62 kg)
Outdoor Unit Dimensions (W × H × D): 885 × 795 × 366 mm (Net / Gross Weight: 67 / 71 kg)
Commercial & Control Features: Wired Wall Controller Included, Rear/Bottom Air Return Option, Fresh Air Intake Port, Hotel Key-Card Interlock, Fire Alarm Interlock, Water-Level Protection Switch, Filter Clean Signal, Auto-Restart
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.