Brand: Hisense
Capacity: 24,000 BTU (2.0 Ton) Output
Design: Concealed Ceiling Ducted AC
Climate Mode: Dual Cooling and Heating
Compressor: Heavy-Duty Fixed Speed
Refrigerant & Control: R410A Gas, Wired Controller
SKU: MF-2443-CQAW5
Categories: Air Conditioner / AC, Hisense air conditioner / AC
Hisense AUD-24HX4SLH1 24,000 BTU (2.0 Ton) Concealed Ducted Split Air Conditioner (Heavy Classic Series, paired with outdoor condensing unit AUW-24H4SF) installs completely out of sight inside false ceilings, soffits, or utility bulkheads. Delivering conditioned air smoothly through sleek linear slot diffusers or architectural grilles, this 2.0-Ton system effectively regulates spaces measuring up to 70–75 square meters while keeping your ceiling line clean and uncluttered.
Designed to fit comfortably inside standard commercial and residential ceiling voids, the AUD-24HX4SLH1 indoor fan-coil unit features a compact galvanized steel chassis measuring 900 × 270 × 720 mm. Its multi-speed centrifugal blower delivers a high airflow rate of 1,250 / 1,000 / 900 m³/h (735 / 588 / 529 CFM) paired with a rated external static pressure (ESP) of 50 Pa (adjustable up to 80–120 Pa). This medium-static capability allows conditioned air to travel cleanly through insulated ducting across multiple zones or elongated rooms without airflow loss.
To adapt seamlessly to diverse ceiling plenum layouts, the Hisense AUD-24HX4SLH1 supports configurable rear or bottom air return intake, simplifying ductwork routing during installation. Inside, a corrosion-proof molded polystyrene condensate drain pan with a built-in condensate level sensor prevents rust and protects ceilings against moisture. Additionally, a dedicated fresh-air intake knockout enables installers to introduce filtered outdoor air into the duct system, replenishing indoor oxygen levels and enhancing overall indoor air quality in sealed commercial spaces.
Built for dependable performance across changing seasonal weather, this ducted system combines powerful air conditioning with a reversible heat pump for dual Cooling and Heating operation. In cooling mode, it rapidly extracts heat and excess indoor humidity at a rated power input of 2,340W (10.3A). During chilly rainy-season mornings, cool evenings, or high-altitude climates, switching to heating mode circulates gentle, uniform warmth through your ceiling vents at 2,215W (9.6A)—achieving a strong heating COP of 3.61 without the dry air or floor clutter of portable electric heaters.
Because the indoor unit sits concealed behind insulated ceiling boards and operates at low sound pressure levels of 38 / 40 / 42 dB(A), conditioned air enters the room with minimal audible disruption—ideal for conference rooms, hotel guest rooms, and private clinics. Outside, the rugged AUW-24H4SF condensing unit houses a heavy-duty Fixed Speed rotary compressor charged with zero-ozone-depletion R410A refrigerant (1.58 kg factory charge), supporting refrigerant piping runs up to 35 meters in length and 15 meters in vertical elevation difference.
Tailored for hospitality and commercial facility management, the Hisense AUD-24HX4SLH1 includes built-in hotel key-card access interlock terminals (automatically shutting down HVAC when guests remove their room key card to prevent energy waste) as well as fire alarm / smoke detector interlock ports for automated safety shutdown. Daily operation is managed via the included wired wall controller featuring a programmable On/Off timer, Smart Defrost protection, self-diagnostic fault monitoring, and Auto-Restart memory following power interruptions. (Note: Supplied as a 24,000 BTU indoor/outdoor ducted set; copper refrigerant pipes and ducting accessories are sized separately to match site layout.)
Brand: Hisense
System Model Number: AUD-24HX4SLH1 / AUW-24H4SF (Heavy Classic Series)
Indoor / Outdoor Unit Models: AUD-24HX4SLH1 (Indoor) / AUW-24H4SF (Outdoor)
Air Conditioner Type: Concealed Ceiling Ducted Split System (Medium Static Pressure)
Nominal Capacity: 24,000 BTU/h / 2.0 Ton (Recommended Area: Up to 71 m²)
Compressor Technology: Fixed Speed (Non-Inverter) Heavy-Duty Rotary Compressor
Climate Functionality: Cooling and Heating (Reversible Heat Pump)
Power Supply: 220–240V~, 1 Phase, 50Hz
Rated Power Input (Cooling / Heating): 2,340 W / 2,215 W
Rated Running Current (Cooling / Heating): 10.3 A / 9.6 A
Heating Coefficient of Performance (COP): 3.61
Indoor Airflow Rate (Hi / Med / Lo): 1,250 / 1,000 / 900 m³/h (735 / 588 / 529 CFM)
External Static Pressure (ESP): 50 Pa Rated (Adjustable 80 – 120 Pa)
Indoor Sound Pressure Level (Hi / Med / Lo): 42 / 40 / 38 dB(A)
Outdoor Sound Pressure Level: 56 dB(A)
Refrigerant Type & Factory Charge: R410A (1.58 kg)
Refrigerant Pipe Connections: Liquid Side: Φ9.52 mm (3/8") | Gas Side: Φ15.88 mm (5/8")
Drain Pipe / Max Pipe Length / Max Elevation: Φ32 mm Drain Port | 35 m Max Pipe Length | 15 m Max Level Difference
Indoor Unit Dimensions (W × H × D): 900 × 270 × 720 mm (Net / Gross Weight: 30 / 35 kg)
Outdoor Unit Dimensions (W × H × D): 860 × 665 × 310 mm (Net / Gross Weight: 51 / 56 kg)
Commercial & Control Features: Wired Wall Controller Included, Rear/Bottom Air Return Option, Fresh Air Intake Port, Hotel Key-Card Interlock, Fire Alarm Interlock, Smart Defrost, Programmable Timer, Auto-Restart
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.